This forum is still new and may look a bit empty at the moment.
Please don’t hesitate to ask your questions. If you are building a Raw Creative 2.5, planning your build or wondering about parts, setup or assembly, feel free to start a topic.
I will do my best to answer questions and help as much as I can. As more builders join, the forum will grow into a useful place for tips, build discussions and shared experience.
Last seen: Nov 6, 2026
For steel cutting, I want to be a little careful with my recommendation. The Raw Creative 2.5 is an aluminium profile based machine, and I would not...
Unfortunately, I do not have a finished file for the rail alignment jig available at the moment.But it is a very simple jig to make yourself. The line...
That is a big question, but I will try to answer the parts I can.One important thing I think you may have missed is the rack and pinion version. The R...
Yes, A36 or 1008 mild steel should be perfectly fine for the plates, especially if they are powder coated or otherwise protected against rust. You d...
You can use V-slot profiles in the 2020 range, but if you are in Europe, g0 to Motedis.com and look for 2020 i type profiles
Hi, you can download the plates from here:/p>
If you think the belt version looks manageable, than the rack version is as easy, i can take the belt version as it is now and convert it to racks in ...
Tack! Yes the rack version is a tested machine and it has very good cutting results and perfect for larger machines.
Hi Dan,Great to hear that you are planning to build the rack version.Yes, it is normally very easy to cut the rack to the correct length. The rack can...